数控机床几何误差论文的参考文献

时间：2022-10-09 08:51:43 数控毕业论文我要投稿

相关推荐

数控机床几何误差论文的参考文献

　　参考文献

数控机床几何误差论文的参考文献

　　[1]

　　倪军.数控机床误差补偿研究的回顾与展望[J].中国机械工程,1997,8(1):29~32.

　　[2]

　　Ramesh R, Mannan M A, Poo A N. Error compensation in machine tools — a review part I: geometric, cutting-force induced and fixture-dependent errors. International Journal of Machine Tools & Manufacture,2000, 40: 1235~1256.

　　[3]

　　J. Ni, Study on online identification and forecasting compensatory control of volumetric errors for multiple axis machine tools. PhD dissertation, University of Wisconsin-Madison, 1987.

　　[4]

　　Ramesh R, Mannan M A, Poo A N. Error compensation in machine tools — a review Part II: thermal errors. International Journal of Machine Tools & Manufacture,2000, 40:1257~1284.

　　[5]

　　Leete D J. Automatic compensation of alignment error in machine tools. International Journal of Machine Tool Design and Research,1961,1:293~324.

　　[6]

　　Hocken R, Simpson, A.J., et at. Three dimensional metrology. Annals of the CIRP, 1977,26(2): 403~408.

　　[7]

　　Zhang G, Veale R, Charlton T, Borchardt B, Hocken R. Error compensation of coordinate measuring machines. Annals of the CIRP, 1985,34 (1): 445~448 .

　　[8]

　　Schultschik R. The components of the volumetric accuracy. Annals of the CIRP ,1977,25(1):223~228.

　　[9]

　　Kiridena V, Ferrira P. Kinematic modeling of quasi-static errors of three-axis machine centers. Int. J. Mach. Tools Manufact.,1994,34(1):85~100.

　　[10]

　　Ni J. and S. M. Wu. An on-line measurement technique for machine volumetric error compensation. Journal of engineering for industry, 1993, 115: 85~92.

　　[11]

　　Chen J S, Yuan J, Ni J, Wu S M. Real-time compensation for time-variant volumetric errors on a machining center, Transactions of the ASME, journal of Engineering Industry,1993, 115:472~479.

　　[12]

　　Eung-Suk Lee,Suk-Hwan Suh and Jin-Wook Shon. A comprehensive method for calibration of volumetric positioning accuracy of cnc-machines. Advanced manufacturing technology, 1998,14(1): 43~49.

　　[13]

　　Dufour P, Groppetti R. Computer aided accuracy improvement in larger NC machine tools. M.T.D.R. Conference Proceedings,1988,22:611~618.

　　[14]

　　A.C.Okafor, Yalcin M.Ertekin. Derivation of machine tool error models and error compensation procedure for three axes vertical machining center using rigid body kinematics. International Journal of Machine Tools and Manufacturing, 2000, 40:1199~1213.

　　[15]

　　Hooman Tajbakhsh, Zainul Abadin and Placid M. Ferreira. L∞ Parameter estimates for volumetric error in models of machine tools. Precision Engineering, 1997, 20 :179~187.

　　[16]

　　Chen Guiquan. Rapid volumetric error mapping and compensation for a three-axis machine center. Ph.D. thesis, Michigen University, USA, 2000.

　　[17]

　　Christopher D. Mize and John C. Ziegert. Durability evaluation of software error correction on a machine center. International Journal of Machine Tools and Manufacturing, 2000, 40:1527~1534.

　　[18]

　　李书和.数控机床误差补偿的研究[D]. 天津：天津大学,1996.

【数控机床几何误差论文的参考文献】相关文章：

数控机床几何误差及其补偿方法研究论文10-12

浅议数控机床几何误差及其补偿方法论文10-12

论文参考文献11-14